FJ Cargo Box
-
- Advance
- Posts: 0
- Joined: Tue Sep 14, 2010 8:01 am
Let me know if the carpenter can do lizard skin or allegator skin then I might be interested
- desert_hawk
- Intermediate
- Posts: 0
- Joined: Mon Jan 23, 2012 11:54 am
This design is good, another option would be to keep the left small part open from the top, this will allow people to store jerry cans (water or fuel) strapped to the floor and couple of chairs in a standing position
mine fits 2 chairs, sleeping bag, tent, sleeping mat, water jerry can, 2 childrens chairs, medium size shovel, all tightly assembled to prevent it from moving in case worse would happen (this is tested)
you can add a sleeping platform to the top of the drawers, that can be opened during camping to fit the length of an adult, of up to 180 cm tall, and it is more comfortable with the carpet, sleeping mat and sleeping bag than the tent (without the air mattress for sure)
having said that, the lower piece of wood should occupy all the space, as it should be fixed to the body by the 2 original screw holes (with longer screws) in the back end, and by chains to the front screw holes, this way it will be as if it is part of the car body (again tested without any issues)
will try to get some photos and post it soon
if you want to remove it in the future, there won't be any problem for that, just 4 screws and everything is out
mine fits 2 chairs, sleeping bag, tent, sleeping mat, water jerry can, 2 childrens chairs, medium size shovel, all tightly assembled to prevent it from moving in case worse would happen (this is tested)
you can add a sleeping platform to the top of the drawers, that can be opened during camping to fit the length of an adult, of up to 180 cm tall, and it is more comfortable with the carpet, sleeping mat and sleeping bag than the tent (without the air mattress for sure)
having said that, the lower piece of wood should occupy all the space, as it should be fixed to the body by the 2 original screw holes (with longer screws) in the back end, and by chains to the front screw holes, this way it will be as if it is part of the car body (again tested without any issues)
will try to get some photos and post it soon
if you want to remove it in the future, there won't be any problem for that, just 4 screws and everything is out
- caprihorse
- Golden Member
- Posts: 10
- Joined: Tue Nov 16, 2010 1:23 am
- Location: Bratislava, Slovakia
- Been thanked: 3 times
- Contact:
Where is the place for mother-in-law in these settings?
-
- Advance
- Posts: 0
- Joined: Tue Sep 14, 2010 8:01 am
[quote=fida;19566]How about Alligator skin with Ivory handles with diamond studded around it.[/quote]
There ....now we are talking......waiting on Ms D for the pricing
There ....now we are talking......waiting on Ms D for the pricing
-
- Golden Member
- Posts: 0
- Joined: Wed Dec 08, 2010 2:09 pm
Guys the box recently fixed on my DC COST me approx. 500 dhs. Just buy the stuff yourself and then go to carpenter pay him 250-300 and u are done.