Page 4 of 8

Posted: Sun Jul 08, 2012 8:55 am
by caprihorse
Did you know, that Garmin device and Blackberry device can use the same A/C charger and USB data cable? At least it works with mine GPSMap276C, Montana 650 and Blackberry Bold 9000.

FJ GPS Mount

Posted: Sun Jul 08, 2012 4:08 pm
by desert_hawk
Try this one, I used it in my FJ for my 276c and now for the Montana, hard like a rock, no drilling is required, all cabling is hidden, very suitable place, visible and doesn't come in the way of anything, you can remove it without leaving any gluing or drilling marks.
You just need to attach it to the 2 screws holding the central mirror, but remember, the metal plate needs to be bent little bit to be like the bend in the roof.

[ATTACH=CONFIG]855[/ATTACH][ATTACH=CONFIG]856[/ATTACH][ATTACH=CONFIG]853[/ATTACH][ATTACH=CONFIG]854[/ATTACH][ATTACH=CONFIG]857[/ATTACH][ATTACH=CONFIG]858[/ATTACH]

Posted: Fri Sep 07, 2012 4:23 pm
by caprihorse
Garmin release a new software update for Montana - Version 4.40

The changelog is as following:

[h=4]Changes made from version 4.20 to 4.40:[/h] Just start BaseCamp, connect your device to your PC and follow the instructions to update your device.

Posted: Fri Sep 14, 2012 12:29 pm
by caprihorse
A new software version 4.50 for Montana 650.

[h=4]Changes made from version 4.40 to 4.50:[/h]
  • Fixed intermittent shutdown when pressing the menu button on the map.
  • Fixed vertical spacing and font of the location data field.

Posted: Sun Sep 16, 2012 12:01 pm
by Darshan
Good info Capri on post #32. Keep it coming!

Posted: Sat Sep 22, 2012 8:34 am
by caprihorse
A new software version 4.60 for Montana 650.

[h=4]Changes made from version 4.50 to 4.60:[/h]
  • Improved map drawing at low zoom levels.
  • Fixed inability to edit archived tracks.
  • Fixed ability to use NMEA depth for waypoints and tracks.
  • Fixed display of geocache coordinates with non-default map datum.
  • Fixed position display on waypoint page.
  • Fixed overlapping position text for right to left languages.

Posted: Tue Nov 27, 2012 9:15 pm
by caprihorse
I found the following problem with my device.

I have a Waypoint XYZ in my device (4.6) and same point in BaseCamp (4.0.5). When I change coordinates in BaseCamp and transfer XYZ to device (overwrite), everything is showing fine, clicking on device in BaseCamp, the new coordinates are there.

However after disconnecting the device from PC, the point XYZ is showing old coordinates, they are not overwritten.

With the tracks and routes is the similar behaviour. When I'm overwriting in the device, track our routes with the same name with new data, they are just not displayed in device, the track or route does not exist.

The way around for me is, before doing to send the data to device, to delete certain points, tracks and routes from device and only after that to transfer the new data to device.
And this is very annoying.

I wrote a report to Garmin, let's see what is their reply.

Posted: Wed Nov 28, 2012 11:46 am
by Paul
Hi Capri

Thanks for the info. Is this a new bug on the new software?
Please let us know what Garmin says.

regards
Paul

Posted: Wed Nov 28, 2012 12:03 pm
by caprihorse
pwood;18330 wrote:Hi Capri

Thanks for the info. Is this a new bug on the new software?
Please let us know what Garmin says.

regards
Paul
I think it's an old one, but until now they didn't realize :010:

Posted: Thu Nov 29, 2012 7:21 am
by Mosalf
Capri, I have a garmin Nuvi 2640 and have been using it on road and offroad with trip log. However, I want to buy a proper off road device in the near future, what do you recommend. The montana 600 is available for 1800 at Amit without road map for UAE.

How about using Ipad, i have seen several members in another club using IPAD with GPS Motion. Does it work?