Page 2 of 4
Posted: Thu Mar 27, 2014 4:55 pm
by Arun Pandyat
Good evening...
One of the garage in Al Quoz is offering the skid plates.. It is a custom made plates and I am looking for my Pathfinder..
1st pic- front portion
2nd pic - back portion
3rd pic - side portion
Is this is good enough? please advise...
[ATTACH=CONFIG]1824[/ATTACH][ATTACH=CONFIG]1825[/ATTACH][ATTACH=CONFIG]1826[/ATTACH]
Posted: Fri Mar 28, 2014 11:57 pm
by Abu Jimmy
Steel or aluminium ? What is the thickness in mm ?
Posted: Sat Mar 29, 2014 6:01 pm
by Arun Pandyat
It is steel and 1.5 mm (14 gauge)...
Posted: Sat Mar 29, 2014 8:41 pm
by caprihorse
Arun Pandyat;34354 wrote:It is steel and 1.5 mm (14 gauge)...
Useless ... Real skid plate has to be alu, at least 5 mm
Posted: Sun Mar 30, 2014 10:09 am
by Arun Pandyat
Thanks Capri...
Posted: Tue Nov 25, 2014 5:10 pm
by Daggerfall
Hi
Where can we find a shop doing aluminum skid plates?
Thanks
Posted: Tue Nov 25, 2014 5:22 pm
by Arun Pandyat
Hi [MENTION=9783]Daggerfall[/MENTION] you can find it in our Almost garage.
Posted: Tue Nov 25, 2014 5:24 pm
by Daggerfall
Arun Pandyat;39652 wrote:Hi @
Daggerfall you can find it in our Almost garage.
Hi Arun
Thanks for the information but I am new to the club where is your garage?
Thanks
Posted: Tue Nov 25, 2014 5:45 pm
by Arun Pandyat
The garage is located at Sharjah National Paint area. You can google almost 4X4 garage and will show the direction. Sorry I don't have GPS cordinates.
You can contact Mr. Don 0566083433.
Posted: Tue Nov 25, 2014 6:46 pm
by Dave
[URL="http://
"]http://[/URL]