Metal grinding noise when the front set of tires is tilting
- Defragmantor
- Intermediate
- Posts: 1
- Joined: Tue Jun 25, 2013 5:12 pm
Hello there
From the time I've done my reinforcement of the axel there happens to be this grinding sound whenever the front set of my tires tilt or go over as if they were touching is that normal or should i pay a visit back to the garage to get it rectified
regards
Defragmantor
From the time I've done my reinforcement of the axel there happens to be this grinding sound whenever the front set of my tires tilt or go over as if they were touching is that normal or should i pay a visit back to the garage to get it rectified
regards
Defragmantor
-
- Advance
- Posts: 0
- Joined: Fri Sep 06, 2013 3:54 pm
Fortunately I am not a Jeep driver so I am unaccustomed to the many quirks of Jeep ownership. However, any "grinding"' sound surely can't be a good thing. Especially if it is only now occurring after a recent modification or upgrade and wasn't there before?! Maybe PM someone like [MENTION=1788]Paul[/MENTION] or [MENTION=1803]Zorro[/MENTION] who seem to know all things Jeep and have more than likely carried out a similar upgrade to their axle. Summer is just around the corner and a desert breakdown is the last thing you want in the hotter months!
-
- Advance
- Posts: 0
- Joined: Mon Jan 02, 2012 5:40 pm
- Location: Dubai
Hi
YES, get it looked at.
Considering it came, after you did some modification, it should be easy to find.
Any grinding noise is bad. It will possibly go away, when the touching parts have completely eaten each other up..... not good.
Regards
Paul
PS: What axle job did you do?
YES, get it looked at.
Considering it came, after you did some modification, it should be easy to find.
Any grinding noise is bad. It will possibly go away, when the touching parts have completely eaten each other up..... not good.
Regards
Paul
PS: What axle job did you do?
- Green Giant
- Intermediate
- Posts: 0
- Joined: Sat Jan 12, 2013 9:19 am
Defrag, did you get the Artec system installed by Ramy? You need to have at least 2 1/2" lift to clear the axle. I would go back to Ramy and get them to have a look.
- Defragmantor
- Intermediate
- Posts: 1
- Joined: Tue Jun 25, 2013 5:12 pm
[quote=Green Giant;41734]Defrag, did you get the Artec system installed by Ramy? You need to have at least 2 1/2" lift to clear the axle. I would go back to Ramy and get them to have a look.[/quote]
Yea the Artec axle ... Will go back to Em to have a look at
thanx !
Yea the Artec axle ... Will go back to Em to have a look at
thanx !
-
- Newbie
- Posts: 0
- Joined: Wed Oct 10, 2012 12:49 am
[quote=Green Giant;41734]You need to have at least 2 1/2" lift to clear the axle.[/quote]
I'm glad I got to read this comment before getting my axle reinforced!
[quote=Defragmantor;41737]Will go back to Em to have a look at[/quote]
Please let us know the response and how they fix it!
I'm glad I got to read this comment before getting my axle reinforced!
[quote=Defragmantor;41737]Will go back to Em to have a look at[/quote]
Please let us know the response and how they fix it!
- Defragmantor
- Intermediate
- Posts: 1
- Joined: Tue Jun 25, 2013 5:12 pm
[quote=desert_jellyfish;41746]I'm glad I got to read this comment before getting my axle reinforced!
Please let us know the response and how they fix it![/quote]
Will do already spoke to dean from Ramy he's booked me an appointment for Wednesday now let's see ... If it's the lift than guess who's shooting higher :p
Please let us know the response and how they fix it![/quote]
Will do already spoke to dean from Ramy he's booked me an appointment for Wednesday now let's see ... If it's the lift than guess who's shooting higher :p
-
- Advance
- Posts: 0
- Joined: Thu Mar 24, 2011 1:31 pm
it means time to sell the can and change to rubicon :Psmiley: