Garmin Montana 600 - How to set your Course (CDI)

Post Reply
User avatar
caprihorse
Golden Member
Golden Member
Posts: 9
Joined: Tue Nov 16, 2010 1:23 am
Location: Bratislava, Slovakia
Has thanked: 2 times
Been thanked: 4 times
Contact:

Sun Jun 17, 2012 1:39 pm

Montana has a new software update V4.20.

Changes made from version 4.10 to 4.20:

  • Added ability to sort waypoints alphabetically
  • Improved search speed in Where To? menus
  • Fixed review of individual route points through the Route Planner
  • Fixed issue with the Glide Ratio data field
  • Fixed occasional map display issue when using Topo Deutschland 2012 Pro or Garmin TransAlpin 2012 Pro
Open BaseCamp, connect your device and update your unit software.
Trident
Newbie
Newbie
Posts: 0
Joined: Thu Aug 23, 2012 6:53 pm

Thu Mar 14, 2013 3:11 pm

caprihorse;12275 wrote:You can add your welcoming message when the unit power up.

Go to folder Garmin and find the file startup.txt

Add your line at the end, e.g.:


Welcome,
this unit belongs to xxxxx.
If found pls call xxxxxxxxxx.
Thanks Capri,
I've done my Welcome Note as suggested.

Cheers!
Trident
Newbie
Newbie
Posts: 0
Joined: Thu Aug 23, 2012 6:53 pm

Thu Mar 14, 2013 3:14 pm

I can't set up date and time. I can't fix the right date and time. Will appreciate your help!
User avatar
caprihorse
Golden Member
Golden Member
Posts: 9
Joined: Tue Nov 16, 2010 1:23 am
Location: Bratislava, Slovakia
Has thanked: 2 times
Been thanked: 4 times
Contact:

Thu Mar 14, 2013 3:48 pm

Trident;23869 wrote:I can't set up date and time. I can't fix the right date and time. Will appreciate your help!
On any GPS device, date and time is coming straight from the satellite, and you cannot adjust it, you just need to set time zone (Montana 6XX > Setup > Time >Time Zone (Automatic). Did you read the book for your device?
Post Reply