Disable The Seat Belt Alarm In JEEP

User avatar
admin
Site Admin
Site Admin
Posts: 18
Joined: Thu May 24, 2018 6:57 pm
Has thanked: 4 times
Been thanked: 2 times

The seatbelt chime can be turned on or off by your dealer, given that they would agree to do it for you that is As another option,
I've found this on another website a long time ago and saved the procedure on a word document. I never tried it but I remember that everyone who did try said it worked. Here goes:


"NOTE:
The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or START position.


The manufacturer does not recommend deactivating the Enhanced Warning System (BeltAlert).

1. Turn the ignition switch to the OFF position, and buckle the driver’s seat belt.

2. Turn the ignition key to the ACCESSORY/RUN position (engine does not need to be running)
and wait for the Seat Belt Warning Light to turn off.

3. Within 60 seconds of starting the vehicle, unbuckle and then re-buckle the driver’s seat belt at least three times within 10 seconds
ending with the seat belt buckled.

4. Turn the ignition key to the OFF position. A single chime will sound to signify that you have successfully completed the programming.

The Enhanced Warning System (BeltAlert) can be reactivated by repeating this procedure.

NOTE:
Although the Enhanced Warning System (BeltAlert) has been deactivated, the Seat Belt Warning Light will continue to illuminate while the driver’s seat belt remains unfastened."


Cheers!
Adventures League of Mountains, Oceans & Sand Thrills
User avatar
Abu Jimmy
Marshal
Marshal
Posts: 121
Joined: Sat Feb 26, 2011 5:54 pm
Location: Sharjah
Been thanked: 1 time

I hope i can do this to my mercedes cause this seat belt alarm is driving me nuts...!!!!!!!!!!!
What goes around , comes around .
User avatar
caprihorse
Golden Member
Golden Member
Posts: 9
Joined: Tue Nov 16, 2010 1:23 am
Location: Bratislava, Slovakia
Contact:

Abu Jimmy;4936 wrote:I hope i can do this to my mercedes cause this seat belt alarm is driving me nuts...!!!!!!!!!!!
There is a trick for any Mercedes to solve this.

Put a sand bag, at least 25 kg on your front seat and fasten the seat belt. Don't forget 3 times to hit clutch pedal. It is guaranteed, that the alarm will disappear.
:463:
User avatar
Abu Jimmy
Marshal
Marshal
Posts: 121
Joined: Sat Feb 26, 2011 5:54 pm
Location: Sharjah
Been thanked: 1 time

caprihorse;4939 wrote:There is a trick for any Mercedes to solve this.

Put a sand bag, at least 25 kg on your front seat and fasten the seat belt. Don't forget 3 times to hit clutch pedal. It is guaranteed, that the alarm will disappear.
:463:
Although its driving me nuts , but still Im not that much " nuts " to believe this ,Capri.............loooooooooooooooool..!!!!!
.
.
.
What goes around , comes around .
mtalel
Newbie
Newbie
Posts: 0
Joined: Wed Jan 11, 2012 3:45 pm

thanks alkhatib its works on my wrangler
Vanne
Club Member
Club Member
Posts: 0
Joined: Mon Aug 20, 2012 4:16 pm

I like it, reminds me to Belt Up!
User avatar
Green Giant
Intermediate
Intermediate
Posts: 0
Joined: Sat Jan 12, 2013 9:19 am

ALKHATIB;4900 wrote:The seatbelt chime can be turned on or off by your dealer, given that they would agree to do it for you that is As another option,
I've found this on another website a long time ago and saved the procedure on a word document. I never tried it but I remember that everyone who did try said it worked. Here goes:


"NOTE:
The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or START position.


The manufacturer does not recommend deactivating the Enhanced Warning System (BeltAlert).

1. Turn the ignition switch to the OFF position, and buckle the driver’s seat belt.

2. Turn the ignition key to the ACCESSORY/RUN position (engine does not need to be running)
and wait for the Seat Belt Warning Light to turn off.

3. Within 60 seconds of starting the vehicle, unbuckle and then re-buckle the driver’s seat belt at least three times within 10 seconds
ending with the seat belt buckled.

4. Turn the ignition key to the OFF position. A single chime will sound to signify that you have successfully completed the programming.

The Enhanced Warning System (BeltAlert) can be reactivated by repeating this procedure.

NOTE:
Although the Enhanced Warning System (BeltAlert) has been deactivated, the Seat Belt Warning Light will continue to illuminate while the driver’s seat belt remains unfastened."


Cheers!
Anything similar to disable the handbrake alarm as well?
muaz
Newbie
Newbie
Posts: 0
Joined: Sat Nov 03, 2012 6:30 pm

what about easier way at least you still can go back to normal any time you wish.[ATTACH=CONFIG]1542[/ATTACH]

its in naif car accessories for 10 DHS
User avatar
caprihorse
Golden Member
Golden Member
Posts: 9
Joined: Tue Nov 16, 2010 1:23 am
Location: Bratislava, Slovakia
Contact:

Green Giant;28452 wrote:Anything similar to disable the handbrake alarm as well?
It's not good idea, to disable this alarm. As we are saying at the beginning of the trip always "Engage your 4x4 and release handbrake" is not a joke. With panicking newbies it does happen all the time.
Adnan
Advance
Advance
Posts: 0
Joined: Mon Feb 27, 2012 2:44 pm

Whatever features done by the manufacturer in your car is indeed in sake of your benefit of safety.,,,,just try to respect them.:yarr:
Post Reply