Towing Point
-
- Newbie
- Posts: 0
- Joined: Wed Mar 06, 2013 8:54 pm
Chief, where can we buy good strong bolts and nuts, reliable toocaprihorse;24362 wrote:Definitely I advice you to use this solution, as it is fixed with many bolts (pay attention to the bolt spec), comparing with two bolts, who knows from which material...
- caprihorse
- Golden Member
- Posts: 10
- Joined: Tue Nov 16, 2010 1:23 am
- Location: Bratislava, Slovakia
- Been thanked: 3 times
- Contact:
Hehe, you are asking a good question, I hope we can offer this soon on our garage... at the moment just see some bolts&nuts shops in Sharjah, BMW road...MaddieTJ;24373 wrote:Chief, where can we buy good strong bolts and nuts, reliable too
- caprihorse
- Golden Member
- Posts: 10
- Joined: Tue Nov 16, 2010 1:23 am
- Location: Bratislava, Slovakia
- Been thanked: 3 times
- Contact:
For my rear central towing point in 2006 I paid 800 Dhs...MaddieTJ;24371 wrote:Chief Marshal, Yasir. ...... At Autoplus, there's a tow hitch for TJs which replaces the original bumper, seemed quite heavy duty and at 500 affordable too:008:.
-
- Advance
- Posts: 0
- Joined: Mon Jan 02, 2012 5:40 pm
- Location: Dubai
Hi Guys
The best place for nuts and bolts, that i have found is:
Golden Screw in Ras Al Khor ( Near Auto Mart )
On Google Map:
25.179942,55.346385
YOU need to know what size and grade of nut/bolt you want and they may have it.
I have found Grade 5 and 8 imperial sizes and grade 10.9 and 12.9 Metric.
Regards
Paul
The best place for nuts and bolts, that i have found is:
Golden Screw in Ras Al Khor ( Near Auto Mart )
On Google Map:
25.179942,55.346385
YOU need to know what size and grade of nut/bolt you want and they may have it.
I have found Grade 5 and 8 imperial sizes and grade 10.9 and 12.9 Metric.
Regards
Paul
- caprihorse
- Golden Member
- Posts: 10
- Joined: Tue Nov 16, 2010 1:23 am
- Location: Bratislava, Slovakia
- Been thanked: 3 times
- Contact:
Paul, I'm afraid you're talking Japanese... For many... What does it mean GRADE? And Imperial Sizes?pwood;24381 wrote:Hi Guys
The best place for nuts and bolts, that i have found is:
Golden Screw in Ras Al Khor ( Near Auto Mart )
On Google Map:
25.179942,55.346385
YOU need to know what size and grade of nut/bolt you want and they may have it.
I have found Grade 5 and 8 imperial sizes and grade 10.9 and 12.9 Metric.
Regards
Paul
-
- Advance
- Posts: 0
- Joined: Mon Jan 02, 2012 5:40 pm
- Location: Dubai
Hi Capri
Metric is measured in millimeters (mm).
Imperial is measured in Inches ( in or " )
Most of the Imperial bolts have their size quoted by the fraction of an inch. (e.g. 9/16")
The Grade of a bolt is its strength. Unfortunately the Imperial and Metric system don't use the same standard.
For Suspension and towing points you want STRONG bolts like Grade 8 (imperial) and Grade 12.9 (Metric)
You also want to get a bolt that is shanked (not threaded) for as long as possible and the threaded bit only once it has gone completely through what you are trying to bolt together.
Here is a link to a bolt shop that has lots of info:
http://www.boltdepot.com/fastener-infor ... Chart.aspx
Regards
Paul
Metric is measured in millimeters (mm).
Imperial is measured in Inches ( in or " )
Most of the Imperial bolts have their size quoted by the fraction of an inch. (e.g. 9/16")
The Grade of a bolt is its strength. Unfortunately the Imperial and Metric system don't use the same standard.
For Suspension and towing points you want STRONG bolts like Grade 8 (imperial) and Grade 12.9 (Metric)
You also want to get a bolt that is shanked (not threaded) for as long as possible and the threaded bit only once it has gone completely through what you are trying to bolt together.
Here is a link to a bolt shop that has lots of info:
http://www.boltdepot.com/fastener-infor ... Chart.aspx
Regards
Paul